Pennsylvania Power Plant Saves 1.3 Million Gallons of Drinking Water per Day after Installing GE’s Advanced Water Reuse Technology
January 6, 2015
- Covanta’s Delaware Valley Energy-from-Waste Facility is First North American Industrial Company to Install GE’s RePAK* Combination Ultrafiltration and Reverse Osmosis System
- Equipment Enables Facility to Reuse Nearby Wastewater Treatment Plant’s Water Instead of Consuming Local Drinking Water Supplies
- Covanta Honored with GE Return on Environment Award
- Project Becomes Water Reuse Investment Model for U.S. Industrial Companies
TREVOSE, PA.—January 6, 2015—Covanta’s Delaware Valley energy-from-waste facility in Chester, Pennsylvania, has saved 1.3 million gallons a day (MGD) from local water supplies by installing GE’s (NYSE: GE) advanced RePAK* water reuse technology in the power plant’s cooling tower. GE honored Covanta with the Return on Environment (ROE) award to recognize the company for its noteworthy reductions in water usage.
The Chester facility generates up to 90 megawatts of clean energy from 3,510 tons per day of municipal solid waste. Previously, the plant used 1.3 MGD—or nearly 5 million liters a day—of municipal drinking water in its waste conversion process, costing the company thousands of dollars in daily water purchases.
To reduce facility operating expenses and the consumption of local water resources, Covanta Delaware Valley upgraded the facility by installing GE’s RePAK combination ultrafiltration (UF) and reverse osmosis(RO) system as a tertiary treatment package. The new system enabled the plant to reuse 1.3 MGD of treated discharge water from a nearby municipal wastewater treatment plant for the facility’s cooling tower.
GE installed two RePAK-450 trains, each producing 450 gallons per minute of purified water. As a result, Covanta Delaware Valley has eliminated the need to purchase 1.3 MGD of local drinking water a day, which results in a substantial financial savings in addition to the extremely favorable environmental benefits.
“By installing GE’s water treatment technology, we are able to reuse the nearby wastewater treatment plant’s wastewater effluent that otherwise would have been directly discharged, enabling us to save over a million gallons per day in drinking water for local residents rather than using it for industrial purposes. Not only are we reducing the stress on local drinking supplies, but also the environmental impacts of the wastewater treatment plant and the use of potable water by our facility,” said Tim Gregan, facility manager, Covanta Delaware Valley.
GE’s RePAK equipment was delivered in 2014, with commissioning taking place the same year, making Covanta Delaware Valley the first North American company to deploy GE’s RePAK technology.
The ROE award is a prestigious award honoring a significant environmental (water, energy, resource) accomplishment. During the ROE three-tier selection process, GE examined set goals as well as the achieved environmental, operational and financial benefits, ultimately recognizing Covanta and its water savings for significantly surpassing and improving environmental and industrial operational goals while balancing industrial demands.
“This project highlights the significant economic and environmental benefits that North American industrial companies can achieve when they decide to make an investment in water reuse technologies,” said Yuvbir Singh, general manager, engineered systems—water and process technologies for GE Power & Water.
Covanta chose a combined treatment technology approach because the typical organic and dissolved mineral content of the wastewater requires additional treatment to be suitable for use as cooling tower makeup. RO was selected as the technology of choice, and UF was required as the pretreatment solution.
GE’s RePAK combined treatment system offers critical advantages by reducing the equipment footprint up to 35 percent as compared to separate UF and RO systems. By combining the UF and RO into a common frame with common controls and GE’s single (patent-pending) multi-functional process tank, GE also is able to reduce the capital costs and field installation expenses when compared to the use of separate UF system and RO systems with multiple process and cleaning tanks.
About GE
GE (NYSE: GE) works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works. For more information, visit the company's website at www.ge.com.
About GE Power & Water
GE Power & Water provides customers with a broad array of power generation, energy delivery and water process technologies to solve their challenges locally. Power & Water works in all areas of the energy industry including renewable resources such as wind and solar; biogas and alternative fuels; and coal, oil, natural gas and nuclear energy. The business also develops advanced technologies to help solve the world’s most complex challenges related to water availability and quality. Power & Water’s six business units include Distributed Power, Nuclear Energy, Power Generation Products, Power Generation Services, Renewable Energy and Water & Process Technologies. Headquartered in Schenectady, N.Y., Power & Water is GE’s largest industrial business.
Follow GE Power & Water and GE’s water business on Twitter @GE_PowerWater and @GE_Water.
*Trademark of the General Electric Company; may be registered in one or more countries.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.