EPA
Changes Cleanup Plan for Polluted Ground Water at Superfund Site
in South
Plainfield, New Jersey
Responds
to Input from Public
Contact:
Elias Rodriguez, 212-637-3664, rodriguez.elias@epa.gov
(New
York, N.Y. – October 11, 2012) – The U.S. Environmental Protection Agency has
finalized its plan to address contaminated ground water at the Cornell-Dubilier
Electronics Superfund site in South Plainfield, New Jersey to prevent its use as
a source of drinking water. In response to public input, the EPA is changing its
proposed plan by deferring action on a portion of the ground water that may be
adversely affecting the Bound Brook until further information is collected. The
ground water affected by the site became contaminated with volatile organic
compounds and polychlorinated biphenyls (PCBs) from past industrial
activities. Volatile organic compounds can cause serious damage to people’s
health. PCBs are likely cancer causing chemicals and can have
serious neurological effects. Under an action announced by the EPA this week,
the ground water will be monitored and its use will be restricted.
The
EPA held a public meeting on August 7, 2012 in South Plainfield to explain its
plan. The EPA took public comment for 60 days and considered public input before
finalizing the plan.
Cornell-Dubilier
Electronics, Inc. manufactured electronics parts at a 26-acre facility at 333
Hamilton Boulevard in South Plainfield from 1936 to 1962. PCBs and solvents were
used in the manufacturing process, and the company disposed of PCB-contaminated
materials and other hazardous waste at the facility property. The ground water
affected by the Cornell-Dubilier Electronics site is contained within a bedrock
area known as the Brunswick Formation. The EPA’s studies found an extensive area
of over 800 acres affected by Cornell-Dubilier’s disposal practices, extending
under Spring Lake to the north and east of the site.
Because
of the nature and complexity of the contamination at the site, the EPA divided
the investigation and cleanup into four phases. The final plan addresses the
third phase of the long-term cleanup.
Under
the first phase of cleanup, which is continuing, the EPA has cleaned up nearby
residential, commercial and municipal properties. PCB-contaminated soil has been
removed from five residential properties near the former
facility property, and the EPA is currently cleaning up eight additional
properties. This work will be completed before the winter. Investigations are
still being performed on several other properties as part of the first phase of
the cleanup.
Under
phase two, the EPA cleaned up the contaminated buildings and soil at the former
facility property. The EPA has demolished 18 contaminated buildings and removed
26,400 tons of building debris off-site to be disposed of properly. The EPA has
also excavated approximately 21,000 tons of contaminated debris and soil from an
undeveloped area of the facility. Using $30 million in American Recovery and
Reinvestment Act funds, the EPA continued the second phase of cleanup by
treating contaminated soil on-site using a technology that heats the material so
that contaminants can be pulled out and captured. Soil that could not be cleaned
using this method was taken off-site for disposal at a licensed
facility.
The
third phase of the long-term cleanup, and the phase that is the subject of the
final plan, focuses on the contaminated ground water. The EPA will install
additional wells to monitor the ground water and will put in place restrictions
that will prevent the use of untreated ground water as drinking water. In
addition, the EPA’s plan requires periodic sampling to ensure that potentially
harmful vapors from the contaminated ground water do not seep into nearby
buildings. Recent indoor air testing inside nearby buildings shows that vapors
are not currently getting into structures.
After
extensive rock and ground water studies, the EPA concluded that it is not
feasible to treat the contaminated site ground water because of the complex rock
formations underlying the site. In its proposed plan, the EPA included in this
decision a portion of the ground water that may be contaminating the Bound
Brook. The EPA is still investigating this possibility. The community and
environmental representatives expressed concern about drawing conclusions about
this part of the ground water before having information about how it influences
contamination in the Bound Brook. In response, the EPA is deferring action on
this area of the ground water until completion of these investigations.
In
the fourth and final phase of the long-term cleanup, the EPA will focus on the
contaminated sediment and surface water of the Bound Brook. As part of this
phase, the EPA will also evaluate whether to take action regarding the deferred
portion of the ground water that has the potential to affect surface water and
sediment in the Bound Brook. A cleanup plan for phase four is expected in
2013.
South
Plainfield is supplied with public water from several companies. The public
water supply is routinely tested to ensure compliance with federal
and state drinking water
standards.
After
extensive searches, the EPA has found no homeowner wells (that might have been
installed before the availability of public water resources) within the affected
area. The EPA will continue its efforts to identify homeowner wells that might
still exist.
The
Superfund program operates on the principle that polluters should pay for the
cleanups, rather than passing the costs to taxpayers. After sites are placed on
the Superfund list of the most contaminated waste sites, the EPA searches for
parties responsible for the contamination and holds them accountable for the
costs of investigations and cleanups. To date, the EPA’s cleanup costs for this
site exceed $133 million. The EPA has recovered some of its costs
from parties responsible for the contamination and will continue those
efforts.
To
review the plan for the Cornell-Dubilier Electronics Superfund
site, please visit: http://www.epa.gov/region2/superfund/npl/cornell
Follow
the EPA Region 2 on Twitter at http://twitter.com/eparegion2 and visit our
Facebook page, http://www.facebook.com/eparegion2.
#
# #
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.