FOR IMMEDIATE RELEASE
February 16, 2012
EPA Issues Permit for Stormwater Discharges from Construction Sites
February 16, 2012
EPA Issues Permit for Stormwater Discharges from Construction Sites
New permit includes more protections for waterways, shaped by important public and stakeholder feedback
WASHINGTON – The U.S. Environmental Protection Agency (EPA) is issuing a new permit, in accordance with the Clean Water Act, that will provide streamlined permitting to thousands of construction operators, while protecting our nation’s waterways from discharges of polluted stormwater from construction sites. Stormwater discharges from construction sites can contain harmful pollutants, such as nutrients, that contaminate waters, increase drinking water treatment costs, and damage aquatic ecosystems. The new permit was shaped by important input from the public and stakeholders to ensure that it provides important protections for waterways, while also providing flexibility to operators.
The 2012 construction general permit (CGP) is required under the Clean Water Act and replaces the existing 2008 CGP, which expired on February 15, 2012. The new permit includes a number of enhanced protections for surface waters, including provisions to protect impaired and sensitive waters. Under the Clean Water Act, national pollutant discharge elimination system (NPDES) permits are typically issued for a five-year period, after which time EPA generally issues revised permits based on updated information and requirements, as is the case with today’s announcement. NPDES permits control water pollution by including limits on the amount of pollutants that can be discharged into waterways by specific sources. The permit also provides new flexibilities for operators. For example, it allows for emergency projects (e.g., restoration following a flood or other natural disaster) to begin immediately without permit authorization from EPA, while still retaining full authority for EPA to ensure that the project proceeds in an environmentally responsible manner once it has commenced. The permit also enables operators of already permitted projects flexibility where compliance with a new permit requirement is economically impracticable.
The 2012 CGP updates include steps intended to limit erosion, minimize pollution sources, provide natural buffers or their equivalent around surface waters, and further restrict discharges to areas impaired by previous pollution discharge.
Many of the permit requirements implement new effluent limitations guidelines and new source performance standards for the construction and development industry that became effective on February 1, 2010, which include pollution control techniques to decrease erosion and sediment pollution.
WASHINGTON – The U.S. Environmental Protection Agency (EPA) is issuing a new permit, in accordance with the Clean Water Act, that will provide streamlined permitting to thousands of construction operators, while protecting our nation’s waterways from discharges of polluted stormwater from construction sites. Stormwater discharges from construction sites can contain harmful pollutants, such as nutrients, that contaminate waters, increase drinking water treatment costs, and damage aquatic ecosystems. The new permit was shaped by important input from the public and stakeholders to ensure that it provides important protections for waterways, while also providing flexibility to operators.
The 2012 construction general permit (CGP) is required under the Clean Water Act and replaces the existing 2008 CGP, which expired on February 15, 2012. The new permit includes a number of enhanced protections for surface waters, including provisions to protect impaired and sensitive waters. Under the Clean Water Act, national pollutant discharge elimination system (NPDES) permits are typically issued for a five-year period, after which time EPA generally issues revised permits based on updated information and requirements, as is the case with today’s announcement. NPDES permits control water pollution by including limits on the amount of pollutants that can be discharged into waterways by specific sources. The permit also provides new flexibilities for operators. For example, it allows for emergency projects (e.g., restoration following a flood or other natural disaster) to begin immediately without permit authorization from EPA, while still retaining full authority for EPA to ensure that the project proceeds in an environmentally responsible manner once it has commenced. The permit also enables operators of already permitted projects flexibility where compliance with a new permit requirement is economically impracticable.
The 2012 CGP updates include steps intended to limit erosion, minimize pollution sources, provide natural buffers or their equivalent around surface waters, and further restrict discharges to areas impaired by previous pollution discharge.
Many of the permit requirements implement new effluent limitations guidelines and new source performance standards for the construction and development industry that became effective on February 1, 2010, which include pollution control techniques to decrease erosion and sediment pollution.
The permit will be effective in areas where EPA is the permitting authority: Idaho, Massachusetts, New Hampshire, New Mexico, Washington, D.C., and most U.S. territories and in Indian country lands.
EPA invited the public to comment on the draft permit. The agency also had a webcast to introduce owners and operators of construction sites, members of the public, and State or Tribal permitting authorities to the new requirements of the proposed CGP.
More information on the proposed construction general permit:
http://cfpub.epa.gov/npdes/stormwater/cgp.cfm
EPA invited the public to comment on the draft permit. The agency also had a webcast to introduce owners and operators of construction sites, members of the public, and State or Tribal permitting authorities to the new requirements of the proposed CGP.
More information on the proposed construction general permit:
http://cfpub.epa.gov/npdes/stormwater/cgp.cfm
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.